Product Specifications
Core Features of XC5210-3PQ160C
- Logic Capacity: 10,000+ equivalent gates for comprehensive digital processing
- Package Configuration: 160-pin Plastic Quad Flat Pack (PQ160)
- Speed Grade: -3 (standard performance grade for cost-optimized applications)
- Supply Voltage: 5V nominal operating voltage
- Temperature Range: Commercial grade operation (0ยฐC to +70ยฐC)
- Configuration Type: SRAM-based with volatile configuration memory
- User I/O: Up to 120 configurable input/output pins
- Internal Memory: Integrated memory blocks for data buffering and storage
Detailed Technical Specifications
- Gate Count: Approximately 10,000 equivalent logic gates
- CLB Array: Configurable Logic Blocks arranged in optimized architecture
- Routing Resources: Comprehensive interconnect matrix for flexible signal routing
- Clock Management: Multiple clock distribution networks
- Input/Output Standards: TTL and CMOS compatible I/O buffers
- Configuration Memory: Fast SRAM-based reconfiguration capability
- Power Consumption: Optimized for balanced performance and efficiency
Performance Characteristics
- Maximum Frequency: Suitable for moderate to high-speed applications
- Propagation Delay: Standard timing for -3 speed grade
- Setup/Hold Times: Optimized for reliable data capture and processing
Pricing Information
XC5210-3PQ160C offers competitive pricing for standard performance applications:
- Unit Pricing: Typically ranges from $40-180 depending on quantity and supplier
- Volume Pricing: Significant discounts available for orders of 100+ units
- Availability: Regular stock maintained by major electronic distributors
- Lead Times: Generally 2-12 weeks depending on market conditions
- Minimum Orders: Varies by distributor (usually 1-10 pieces for prototype quantities)
Cost Considerations
- Development Costs: Compatible with existing XC5200 design flows
- Programming Equipment: Standard JTAG and parallel programming support
- Total Cost of Ownership: Balanced performance-to-cost ratio for mid-range applications
Pricing information is subject to change based on market conditions and supplier inventory
Documents & Media
Technical Documentation for XC5210-3PQ160C
- Official Datasheet: Complete electrical specifications and timing parameters
- Programming Guide: Detailed configuration and programming procedures
- Pin Assignment Guide: Comprehensive pinout information and signal descriptions
- Design Methodology: Best practices for FPGA design implementation
- Characterization Reports: Performance benchmarks and timing analysis
- Package Information: Mechanical drawings and thermal characteristics
- Migration Guide: Compatibility information with other XC5200 series devices
Design Resources
- HDL Templates: VHDL and Verilog code examples and templates
- Constraint Files: Timing and placement constraint examples
- Reference Designs: Proven implementations for common applications
- IP Core Library: Pre-verified intellectual property blocks
Development Documentation
- Tool Flow Guide: Step-by-step development process documentation
- Simulation Guidelines: Functional and timing verification procedures
- Debug Techniques: Troubleshooting and optimization strategies
Related Resources
Development Ecosystem
- Xilinx Foundation Software: Complete development environment for XC5200 series
- Third-Party Tools: Compatible EDA tools and simulation environments
- Programming Hardware: JTAG cables and parallel programming adapters
- Evaluation Boards: Development platforms featuring the XC5210-3PQ160C
Compatible Devices
- XC5210-4PQ160C: Higher performance version with -4 speed grade
- XC5202-3PQ160C: Lower gate count alternative in same package
- XC5215-3PQ160C: Higher capacity option with similar performance
- Pin-Compatible Alternatives: Migration paths within XC5200 family
Technical Support Resources
- Design Consultation: Expert guidance for complex implementations
- Community Forums: Peer-to-peer support and knowledge sharing
- Training Programs: Educational resources and certification courses
- Application Notes: Industry-specific implementation guidance
Industry Applications
- Telecommunications: Protocol processing and interface controllers
- Industrial Automation: Control systems and sensor interfaces
- Test Equipment: Signal generation and analysis applications
- Medical Devices: Data acquisition and processing systems
Environmental & Export Classifications
Environmental Standards Compliance
The XC5210-3PQ160C adheres to strict environmental regulations:
- RoHS Directive: Fully compliant with lead-free manufacturing requirements
- WEEE Compliance: Waste electrical and electronic equipment regulations
- REACH Regulation: European chemical substance safety compliance
- Green Manufacturing: Environmentally responsible production processes
Operating Environmental Conditions
- Commercial Temperature Range: 0ยฐC to +70ยฐC ambient operation
- Storage Temperature: -65ยฐC to +150ยฐC for long-term storage
- Relative Humidity: 5% to 95% non-condensing operation
- Altitude: Operational up to 2000 meters above sea level
- Vibration Resistance: Industrial standard mechanical specifications
Export Control Information
- Export Classification: ECCN (Export Control Classification Number) available
- Customs Classification: HTS (Harmonized Tariff Schedule) code provided
- Certificate of Origin: Manufacturing location documentation
- Trade Compliance: Adherence to international export regulations
- End-Use Restrictions: Compliance with applicable government regulations
Quality and Reliability Standards
- Manufacturing Standards: ISO 9001 certified production facilities
- Reliability Testing: JEDEC standard qualification procedures
- Quality Assurance: Statistical quality control and testing protocols
- Traceability: Complete manufacturing lot tracking and documentation
- Failure Analysis: Comprehensive root cause analysis capabilities
Packaging and Handling
- ESD Protection: Electrostatic discharge sensitive device precautions
- Moisture Sensitivity: Appropriate MSL (Moisture Sensitivity Level) classification
- Packaging Standards: Industry-standard protective packaging
- Handling Guidelines: Proper storage and handling recommendations
The XC5210-3PQ160C delivers proven FPGA technology with an optimal balance of performance, features, and cost-effectiveness. This device serves as an excellent choice for engineers developing digital systems that require reliable programmable logic capabilities without premium pricing. Whether implementing control systems, interface controllers, or custom digital processing functions, the XC5210-3PQ160C provides the foundation for successful product development.
For current availability, detailed specifications, and pricing information for the XC5210-3PQ160C, contact authorized Xilinx distributors or consult official product documentation.
