XC5206-5PQ160C – Enhanced I/O FPGA Solution from Xilinx XC5200 Family

1. Product Specifications

Core Technical Specifications – XC5206-5PQ160C

The XC5206-5PQ160C provides outstanding performance metrics tailored for demanding commercial applications:

Architecture and Performance Parameters:

• Logic Capacity: 10,000 gates
• Logic Cell Configuration: 784 cells
• Operating Frequency: 83 MHz maximum speed
• Process Technology: 0.5µm three-layer metal CMOS
• Operating Voltage: 4.75V to 5.25V supply range
• Package Type: 160-pin PQFP (Plastic Quad Flat Pack)
• Package Dimensions: 28mm × 28mm
• Temperature Grade: Commercial (0°C to +70°C)
• I/O Count: 133 user-configurable I/O pins
• CLB Count: 196 Configurable Logic Blocks

Advanced Architectural Features of XC5206-5PQ160C:

• VersaBlock™ Logic Module: Advanced configurable logic blocks providing maximum design flexibility and utilization
• VersaRing I/O Interface: Innovative I/O ring architecture optimizing the logic cell to I/O ratio
• SRAM-Based Configuration: Fully reprogrammable architecture enabling rapid prototyping and field updates
• Programmable Slew Rate Control: Configurable output drivers minimize noise while maximizing performance
• Zero Hold Time Design: Input registers with zero flip-flop hold time simplifying system timing closure
• Hierarchical Routing: Rich interconnect resources with multiple routing levels for efficient signal distribution
• Global Clock Networks: Dedicated low-skew clock distribution networks

Detailed Pin Configuration

The XC5206-5PQ160C package offers:

• 133 User I/O Pins: Maximum flexibility for external connections
• Dedicated Power Pins: Multiple VCC and ground connections
• Configuration Interface: Dedicated programming pins
• JTAG Support: Built-in boundary scan capabilities
• Clock Input Pins: Multiple global clock inputs with dedicated routing

Electrical Characteristics

DC Specifications:

• Supply Voltage (VCC): 4.75V to 5.25V
• Input High Voltage (VIH): 2.0V minimum
• Input Low Voltage (VIL): 0.8V maximum
• Output High Voltage (VOH): 2.4V minimum
• Output Low Voltage (VOL): 0.4V maximum

AC Performance:

• Maximum System Clock: 83 MHz
• Pin-to-Pin Delay: As low as 7ns
• Setup Time: Device-specific (refer to datasheet)
• Hold Time: Zero for input registers

2. Price Information

Current Market Pricing for XC5206-5PQ160C

The XC5206-5PQ160C pricing structure varies based on multiple factors:

Volume-Based Pricing Tiers:

• Single Unit: Contact distributors for current pricing
• Small Quantities (1-24): Premium pricing applies
• Medium Volume (25-99): Incremental volume discounts
• Production Volume (100-499): Significant cost reductions
• High Volume (500+): Best pricing with negotiated rates

Factors Influencing XC5206-5PQ160C Pricing:

• Current inventory levels and availability
• Lead time requirements (standard vs. expedited)
• Distribution channel (authorized vs. broker)
• Market demand fluctuations
• Packaging options (tray, tube, or tape & reel)

Authorized Distributors Offering XC5206-5PQ160C:

• DigiKey Electronics
• Mouser Electronics
• Arrow Electronics
• Avnet
• Future Electronics
• Worldway Electronics

For accurate, real-time pricing on the XC5206-5PQ160C, request formal quotations from multiple authorized distributors to ensure competitive pricing and availability.

3. Documents & Media

Essential Technical Documentation for XC5206-5PQ160C

Primary Documentation:

• XC5206-5PQ160C Complete Datasheet (PDF)
• XC5200 Series Family User Guide
• Package Mechanical Drawings (160-PQFP)
• Pin Assignment Documentation
• Electrical Specifications Guide
• Programming and Configuration Manual

Design Resources:

• Application Notes for XC5206-5PQ160C implementations
• Reference Design Schematics
• PCB Layout Guidelines for 160-PQFP packages
• Power Supply Design Recommendations
• Thermal Management Guidelines
• Signal Integrity Best Practices

Software Documentation:

• Xilinx Development Tool Guides
• HDL Coding Guidelines
• Timing Constraint Templates
• Simulation Model Documentation
• Debugging and Verification Guides

Multimedia Resources:

• Product Overview Videos
• Training Webinars
• Technical Presentations
• Design Example Demonstrations

4. Related Resources

Development Tools Supporting XC5206-5PQ160C

Software Development Environment:

• Xilinx Vivado Design Suite: Complete development environment with synthesis, implementation, and debugging
• ISE Design Suite: Legacy tool support for existing designs
• ModelSim/QuestaSim: Industry-standard simulation tools
• Synplify Pro: Advanced synthesis optimization
• Third-Party Support: Compatible with major EDA vendors

Hardware Development Platforms:

• XC5200 Family evaluation boards
• 160-PQFP socket adapters for prototyping
• JTAG programming cables and pods
• Logic analyzer interfaces
• Development kits with XC5206-5PQ160C

Application Areas for XC5206-5PQ160C

The XC5206-5PQ160C excels in diverse commercial applications:

Industrial Control Systems:

• Programmable Logic Controllers (PLCs)
• Motion control interfaces
• Process automation equipment
• Sensor data aggregation
• Industrial networking protocols

Communications Infrastructure:

• Protocol converters and bridges
• Network interface controllers
• Telecommunications switching
• Data multiplexing systems
• Modem control logic

Computing and Peripheral Control:

• Bus interface implementations
• Memory controllers
• Graphics and display controllers
• Storage device interfaces
• Co-processor designs

Test and Measurement Equipment:

• Digital oscilloscopes
• Logic analyzers
• Pattern generators
• Protocol analyzers
• Automated test systems

Consumer Electronics:

• Display controllers
• Audio processing systems
• Gaming peripherals
• Set-top box interfaces
• Digital video processing

Technical Support and Community

Support Resources for XC5206-5PQ160C:

• Xilinx official technical support portal
• Community forums and user groups
• Application engineering consultation
• Design review services
• Training courses and workshops
• Third-party design services

5. Environmental & Export Classifications

Environmental Compliance Status – XC5206-5PQ160C

RoHS Compliance Information: According to current distributor data, the XC5206-5PQ160C shows varying RoHS compliance status. Some sources indicate “RoHS (Lead free / RoHS Compliant)” while others report “RoHS: Not Compliant”. This discrepancy requires verification:

• Contact authorized distributors for current compliance certificates
• Request date code specific compliance information
• Consider RoHS-compliant alternatives if required
• Verify with AMD/Xilinx directly for official status

Environmental Specifications:

• Operating Temperature: 0°C to 85°C (TJ)
• Storage Temperature: -65°C to +150°C
• Humidity Range: 5% to 95% non-condensing
• Operating Altitude: Up to 10,000 feet
• Thermal Resistance: Junction-to-ambient dependent on airflow

Reliability Metrics:

• MTBF data available upon request
• ESD Rating: JEDEC HBM Class 2 (2000V)
• Latch-up Immunity: JEDEC compliant
• Moisture Sensitivity Level: Consult datasheet

Export Control Classification

Export Control Details for XC5206-5PQ160C:

The XC5206-5PQ160C is subject to international trade regulations:

Classification Information:

• ECCN: Typically classified under 3A001.a.2 or similar
• HTS Code: 8542.31.0055 (typical for FPGAs)
• Dual-Use Status: Subject to export control regulations

Export Requirements and Restrictions:

• End-use verification may be required
• Country-specific restrictions apply
• License requirements vary by destination
• Technology transfer limitations for certain regions

Compliance Recommendations:

1. Verify current export classification before international shipment
2. Maintain proper export documentation
3. Ensure end-user certificates when required
4. Consult export compliance specialists for specific destinations
5. Check denied parties lists before transactions

Quality Assurance and Certifications

Quality Standards for XC5206-5PQ160C:

• Manufactured under ISO 9001:2015 quality systems
• 100% electrical testing at operating frequency
• Boundary scan testing capability
• Statistical process control throughout manufacturing
• Traceable date/lot codes for quality tracking

Package Information:

• 160-PQFP (28×28mm)
• Surface mount technology
• Lead pitch: 0.65mm
• Coplanarity: 0.10mm maximum
• Package material: Plastic encapsulation

Key Advantages of XC5206-5PQ160C

The XC5206-5PQ160C offers compelling benefits:

✓ Enhanced I/O Capability: 133 I/O pins providing extensive connectivity options ✓ Proven Architecture: Reliable XC5200 family with extensive field deployment ✓ Optimal Package Size: 160-PQFP balances I/O count with board space ✓ Cost-Effective: Commercial temperature rating for standard applications ✓ Comprehensive Support: Mature toolchain and extensive documentation ✓ Design Flexibility: 784 logic cells supporting complex implementations

Ordering Information for XC5206-5PQ160C

When ordering the XC5206-5PQ160C, specify:

• Complete Part Number: XC5206-5PQ160C
• Package Type: 160-pin PQFP
• Speed Grade: -5 (83 MHz maximum)
• Temperature Grade: C (Commercial, 0°C to +70°C)
• Quantity Requirements
• Delivery Schedule
• Packaging Preference

Cross-Reference and Alternatives

Consider these alternatives if XC5206-5PQ160C is unavailable:

• XC5206-5PQ160I (Industrial temperature version)
• XC5206-6PQ160C (Different speed grade)
• XC5206-5TQ144C (144-pin TQFP package)
• XC5210-5PQ160C (Higher gate count)
• XC5204-5PQ160C (Lower gate count)

Applications Success Stories

The XC5206-5PQ160C has been successfully deployed in:

• Industrial automation controllers
• Telecommunications infrastructure
• Medical equipment interfaces
• Automotive infotainment systems
• Defense and aerospace applications

Conclusion

The XC5206-5PQ160C FPGA represents an excellent balance of I/O capability, logic resources, and cost-effectiveness for commercial applications. With its 133 I/O pins and 10,000 gates of programmable logic, the XC5206-5PQ160C provides the connectivity and processing power required for complex digital systems. Engineers selecting the XC5206-5PQ160C benefit from a mature, well-supported platform with comprehensive development tools and extensive documentation, making it an ideal choice for both new designs and legacy system upgrades.

---

Important Notice: Specifications for the XC5206-5PQ160C are subject to change. Always verify current information with authorized AMD/Xilinx distributors or directly with the manufacturer. This product description is for informational purposes only. The XC5206-5PQ160C availability and pricing may vary by region and market conditions. Product lifecycle status should be confirmed before new design implementation.