1. Product Specifications
Core Architecture
- FPGA Family: Artix-7 XA Automotive Grade
- Logic Cells: 33,280 logic cells
- Logic Blocks: 5,200 CLBs (Configurable Logic Blocks)
- Process Technology: 28nm High-K Metal Gate (HKMG)
- Package Type: 324-LFBGA, CSPBGA (Chip Scale Ball Grid Array)
Performance Specifications
- Speed Grade: -2 (Commercial grade timing)
- Maximum Clock Frequency: 628 MHz
- I/O Pins: 210 user I/O pins
- Total Pins: 324 pins
- Supply Voltage: 950 mV to 1.05 V
- Propagation Delay: 130ps
Memory and DSP Resources
- Block RAM: 36 Kb dual-port block RAM with built-in FIFO logic
- Total RAM: 1800 Kbit
- DSP Slices: Advanced DSP48A1 slices for high-performance signal processing
- MMCM/PLL: Mixed-Mode Clock Manager and Phase-Locked Loop
Automotive-Specific Features
- Operating Temperature Range: -40ยฐC to +125ยฐC (extended automotive range)
- AEC-Q100 Qualified: Automotive Electronics Council qualified
- Industrial Screening: Industrial-based screening for automotive reliability
- Lead Finish: Tin/Silver/Copper (Sn/Ag/Cu) lead-free finish
Advanced Features
- SelectIO Technology: High-performance SelectIO with DDR3 support up to 1,866 Mb/s
- XADC: User configurable analog interface with dual 12-bit 1MSPS ADC
- Configuration: Multiple configuration modes including JTAG, SPI, and parallel
- Power Optimization: 50% lower power consumption than previous generation
2. Pricing Information
Current Market Pricing (USD)
- Single Unit Price: $75.00 – $95.00 (estimated automotive grade premium)
- Volume Pricing (1000+ units): $65.00 – $80.00
- Engineering Samples: Available upon request
Note: Automotive-grade XA series components typically command a 15-25% premium over commercial XC7A35T variants due to extended qualification testing and enhanced reliability requirements.
Price Comparison Reference
For reference, the commercial-grade XC7A35T-2CSG324I is priced at:
- DigiKey: $68.18 (commercial grade)
- Volume discounts available for orders of 500+ units
3. Documents & Media
Technical Documentation
- Datasheet: Artix-7 FPGAs Data Sheet: DC and AC Switching Characteristics (DS181)
- User Guide: 7 Series FPGAs Configurable Logic Block User Guide
- SelectIO Resources: 7 Series FPGAs SelectIO Resources User Guide
- PCB Design Guide: Artix-7 FPGA PCB Design and Pin Planning Guide
Design Resources
- Schematic Symbols: Available for OrCAD, Altium, Eagle, KiCad, and other major EDA tools
- PCB Footprints: 324-LFBGA footprint libraries
- 3D Models: STEP and other 3D model formats for mechanical design
- Reference Designs: Automotive-specific reference implementations
Software Tools
- Vivado Design Suite: Primary development environment
- ISE Design Suite: Legacy support (limited)
- SDK: Software Development Kit for embedded processor design
- ChipScope Pro: Logic analyzer for debugging
4. Related Resources
Development Platforms
- Evaluation Boards: Arty A7-35T development board (commercial equivalent)
- Automotive Evaluation Kits: Specialized automotive development platforms
- Starter Kits: Entry-level development solutions
Programming Tools
- JTAG Programmers: Compatible with JTAG-SMT2 and JTAG-SMT3 programmers
- Configuration Devices: SPI Flash memory solutions for configuration storage
- Debug Tools: Hardware debug and analysis tools
Ecosystem Partners
- IP Cores: Extensive library of verified IP for automotive applications
- Third-Party Tools: CAD tools, simulation software, and verification solutions
- Design Services: Professional design and consultation services
Compatible Components
- Memory Interfaces: DDR3, DDR2, LPDDR2 memory controllers
- Communication Protocols: PCIe, Ethernet, CAN, LIN automotive protocols
- Sensor Interfaces: ADC, DAC, and sensor fusion IP cores
5. Environmental & Export Classifications
Environmental Compliance
- RoHS Compliant: Fully compliant with RoHS directive
- REACH Regulation: Compliant with EU REACH chemical regulations
- Conflict Minerals: Conflict-free sourcing certified
- Green Package: Lead-free and halogen-free package options available
Quality Standards
- AEC-Q100: Automotive Electronics Council qualification
- ISO/TS 16949: Automotive quality management system
- Functional Safety: Support for ISO 26262 functional safety standards
Export Classifications
- ECCN: 3A001.a.7 (Export Control Classification Number)
- HTS Code: 8542.33.0001 (Harmonized Tariff Schedule)
- Country of Origin: Various (Ireland, Malaysia, depending on package/test site)
- Export Restrictions: Subject to US Export Administration Regulations (EAR)
Packaging & Storage
- Moisture Sensitivity Level: MSL 3 (168 hours at 30ยฐC/60% RH)
- Storage Temperature: -65ยฐC to +150ยฐC
- Packaging: Tray packaging standard, tape and reel available
- ESD Sensitivity: Class 2 (1000V-2000V HBM)
Lifecycle Information
- Product Status: Active production
- Automotive Lifecycle: Typical 15+ year automotive production commitment
- End-of-Life Notice: Minimum 5-year advance notice policy
- Last Time Buy: Follow standard AMD end-of-life procedures
Optimized for: XA7A35T-2CSG324I, automotive FPGA, Artix-7 XA series, AMD Xilinx automotive, field programmable gate array, automotive electronics, 324-CSBGA, 33280 logic cells, AEC-Q100 qualified
