Looking for the best Field Programmable Gate Array (FPGA) to use for your automotive design? Most of the time, you make mistakes in choosing this circuit. Your best bet is to contact a reliable circuit board designer as Rayming Technology (RayPCB) to look into it.
There are several manufacturers of Field Programmable Gate Array (FPGA) out there with many of them claiming to be the best. However, the quality of their boards and the reliability of their service are some of the best factors for determining this.
In this article, we discuss the Xilinx XA7A25T-1CPG238Q, an automotive FPGA for a variety of uses. It is out bet that this is the circuit board you have been looking for kick-off your next automotive-related circuit board design.
A Bit About the Xilinx XA7A25T-1CPG238Q
The Xilinx XA7A25T-1CPG238Q belongs to the Xilinx Artix-7 family. Xilinx or AMD is one of the major manufacturers of Field Programmable Gate Arrays (FPGAs). The company created the Artix-7 series to improve on some of the downsides of the Xilinx Spartan-6 series.
As for the Artix-7 series, Xilinx took special care to make it better. Engineers have found Field Programmable Gate Arrays (FPGAs) in this series to be very helpful, in terms of operations. This is primarily because of the usage of the Virtex-7 Integrated Circuits (ICs) that enable the board to process digital signals up to 3GHz.
Technical Attributes of the Xilinx XA7A25T-1CPG238Q
As a circuit board engineer or consumer, you need to be certain of the functionalities of the board before paying for it. Thus, we have covered the important attributes of the Xilinx XA7A25T-1CPG238Q IC in this section of the article.
Operating Temperature
Every circuit board, including FPGAs have a peak operating value that must not be exceeded. Exceeding this or operating the board above this could cause it to fail. It is generally called the Operating Temperature.
The Operating Temperature is used to denote the various ranges that ambient temperature in which the power supply in an electrical device or equipment must operate in. Provided that the equipment or device operates within this range, it would be impossible for it to fail.
However, the power supply in the electrical equipment or device may fail if this power supply range is exceeded. The Xilinx XA7A25T-1CPG238Q has an Operating Temperature of ~40˚C (minimum) and 125˚C (maximum).
Packaging
Xilinx XA7A25T-1CPG238Q has a “Tray” packaging. This is the design of the semiconductor package that protects the Integrated Circuits (ICs) or semiconductors inside it.
Compliance
The Xilinx XA7A25T-1CPG238Q IC is RoHS3-compliant. Restriction of Certain Hazardous Substances (RoHS) is used to rate the compliance of an electrical or electronic equipment from excessive dangerous exposure that could hamper human health or trigger negative changes in the environment.
Why You Should Choose the Xilinx XA7A25T-1CPG238Q FPGA
Wondering if the Xilinx XA7A25T-1CPG238Q is the best Field Programmable Gate Array (FPGA) for your next electrical project? Here are a couple of benefits that come with it:
1. Excellent Power Distribution
Designing a FPGA takes time. It takes a lot of testing to be sure the board if working optimally. Because of this, the designer needs lots of uptime to keep the board active while the entire configuration or programming process is completed.
This is one of the benefits of the Xilinx XA7A25T-1CPG238Q. Like other Integrated Circuits (ICs) under the Xilinx Artix-7 series, it offers excellent power distribution. The circuit is made up of Lithium-ion batteries that increase the uptime of the board.
Typically, the batteries can last anywhere between 6 months and a year. Certainly, the entire programming process on the circuit must have been completed within this time.
2. Flexible Usage
No doubt, the concept of Field Programmable Gate Array (FPGA) is not understood by everyone. Some still find it difficult to understand how the board functions. For this category of users, it is expedient to educate them on how the board works.
This is what sets the Xilinx XA7A25T-1CPG238Q apart from the others. Based on the Artix-7 series, it provides educational materials to guide users on how it is to be implemented. Interestingly, some of the Integrated Circuits (ICs) under the Xilinx Artix-7 series are used in some educational institutions. They are used to educate the learners about how Field Programmable Gate Arrays (FPGAs) work.
3. Multi-Configurable Capabilities
It is now news that the Xilinx XA7A25T-1CPG238Q belongs to the Automotive FPGAs. That notwithstanding, it can be configured or programmed to work in other cases. That is the beauty of FPGAs – they can be configured or reprogrammed to function in different ways.
The multiple configurable options of the Xilinx XA7A25T-1CPG238Q permit the users or engineers to modify it for other applications. The programming can either be used for building new circuit systems or creating embeddable designs to attach to existing systems.
4. Higher Frequency Support
Looking for a Field Programmable Gate Array (FPGA) that can function at higher frequencies? Look no further than the Xilinx XA7A25T-1CPG238Q. It supports higher frequencies, which come in handy for operating FPGA boards at higher frequencies.
As to be expected, certain components of the circuit board make this work. One of such components is the compatibility with the Zynq-7000 FGPA series. It is through this that the board is used for high-powered, embedded circuit board programming.
The Xilinx XA7A25T-1CPG238Q also includes support for the 100MHz to 3GHz technology. Through this, the board can be used to implement Software-Defined Radio (SDR) applications, as well as enabling Digital Signal Processing (DSR) operations.
5. Instant Prototyping
Why start from scratch to create a prototype when you can “copy and paste” one? The Xilinx XA7A25T-1CPG238Q comes with built-in resources that include already-made FPGA designs.
You can decide to work with this at the onset to get a hang of things before creating a new custom prototype.
Final Thoughts
Xilinx XA7A25T-1CPG238Q is one of the reliable Integrated Circuits (ICs) you can use for your next automotive electronic project. However, be wary of the limited board space, which doesn’t fit in so well for bigger projects. But if you are working on an electronic project that doesn’t require so much space, this is your go-to IC.
In all, you need an experience designer like RayPCB to transform your ideas to a working framework. So, contact us today for a quote and we will be glad to work with you on the project.
