Skip to content

full introduction of Rogers RO4000 LoPro Series of Laminates

The RO4000 LoPro laminates from Rogers are a versatile and efficient way to enhance the electrical performance of your circuit boards. These laminates are compatible with lead-free PCB manufacturing processes while providing excellent electrical performance. The high-quality materials enable you to design and manufacture circuit boards with higher circuit densities and higher speed. Additionally, these materials have a low dissipation factor, essential for antenna designs.

The RO4000 LoPro laminates consist of proprietary Rogers’ technology. The foil is reverse treated, resulting in a low conductor loss. This minimizes insertion loss and improves signal integrity. These laminates’ low-cost and superior high-frequency performance make them a good choice for high-frequency applications. The RO4000 hydrocarbon ceramic laminates consist of epoxy/glass (FR-4) processes. Moreover, they do not require special preparation. It makes them a viable option for multiple applications.

Features of Rogers RO4000 LoPro

The new Rogers RO4000 LoPro laminates extend the company’s lineup of high-performance materials. These laminates offer improved electrical performance and increased yields while enabling higher circuit densities. These materials are also compatible with lead-free PCB manufacturing processes and are ideal for a wide range of analog and digital applications. Read on to learn more about these materials. They are an excellent choice for all-in-one PCB solutions.

Low z-axis expansion

RO4000 laminates exhibit a low Z-axis coefficient of thermal expansion. In addition, they have low z-axis expansion, which makes them compatible with lead-free processes. The RO4000 LoPro is UL 94 V-0 flame retardant. Therefore, we can use it in various circuit applications. Its unique materials provide the highest degree of insulating performance for base station antennas and other high-speed applications.

Compatible with standard epoxy/glass processes

The RO4000 series of laminates is compatible with standard epoxy/glass processes. The RO4450T bondply supports the use of lead-free processes. The RO4835T laminates provide excellent Dk control. The CU4000 foil provides high outer layer adhesion. This makes them a perfect choice for sequential laminations. These laminates are suitable for many applications, including microwave and millimeter-wave frequencies.

The RO4000 LoPro laminates depend on proprietary Rogers’ technology. They use reverse-treated foil to achieve a low conductor loss. This material is also compatible with standard epoxy/glass processes. It also offers superior high-frequency performance while enabling low-cost circuit fabrication. Achieving these properties allow you to optimize your designs.

Flame-retardant rating

The RO4000 LoPro has a UL 94 V-0 flame-retardant rating, ideal for base station antennas. Its low z-axis coefficient of thermal expansion and high glass transition temperature makes it suitable for multilayer applications. These materials are RoHS compliant and provide good performance. The RO4000 laminates are also suitable for base station antennas. The UL-94-V0 flame-retardant rating of the material makes it ideal for base station applications.

The RO4000 high-frequency laminates depend on the RO4000 platform. They feature improved insertion loss, low Dk variation, and low-profile ED copper. Its 1.3dB/inch insertion loss is a good value and compatible with many products. Designed to meet customers’ needs in the automotive industry, these high-performance products are available in numerous other fields.

Low-temperature coefficient

The Rogers RO4000 LoPro laminates feature a low-temperature coefficient of expansion (CTE), high glass transition temperature, and high Z-axis thermal conductivity. They are also RoHS compliant and are the ideal material for base station antennas. Additionally, these products offer reduced fabrication costs. As a result, we can sue them for a variety of applications.

The low profile reverse-treated copper foil in Rogers RO4000 LoPro laminates improves copper peel strength while allowing the laminates to maintain the same mechanical and thermomechanical reliability. With this material, Rayming PCB & Assembly offers the highest level of insertion loss and superior passive intermodulation characteristics. In addition, this new RO4000 LoPro laminate is suitable for easy PCB design. This new material is perfect for RF and wireless circuit designs.

Easy to design

The new Rogers RO4000 LoPro laminates are easy to design. Their dielectric constant and low Z-axis thermal expansion allow consistent circuit performance and support longer drill tool life. Furthermore, the RO4000 LoPro laminates are RoHS compliant. The RO4000 LoPro is an excellent option for base station antennas with a high glass transition temperature and excellent electrical reliability.

The RO4000 LoPro laminates offer the same benefits as the standard RO4000 materials. Reverse-treated copper foil increases the strength of the laminate and provides the best combination of electrical, mechanical, and thermomechanical reliability. In addition, we can fabricate the laminates using standard epoxy/glass (FR-4) processes. ACMs made of RO4450T have a 3.2-3.3 DK and are available in 3 mils.

Increased electrical reliability and thermal conductivity

The RO4000 LoPro laminates have reverse-treated copper foil for increased electrical reliability and thermal conductivity. The RO4000 LoPro is compatible with FR-4, which means it is compatible with the latter. The laminates’ high-quality copper foils are compatible with FR-4. The RO4000 LoPro has a low insertion loss and excellent passive intermodulation characteristics. Its superior electrical performance makes it a preferred choice for various applications.

The Rogers RO4000 LoPro laminates are an excellent choice for high-frequency applications. Its proprietary technology allows a reverse-treated foil to bond to a standard RO4000 dielectric. The results of this bonding process are low conductor loss and improved insertion and signal integrity. As a result, the RO4000 hydrocarbon ceramic laminates are suitable for high-frequency, low-voltage, and low-cost circuit fabrication.

Benefits of Rogers RO4000 LoPro

The new Rogers RO4000 LoPro laminates provide improved electrical performance and higher yields for printed circuit boards (PCBs). The materials are also compatible with lead-free PCB fabrication processes. The result is an optimized range of analog and digital applications. The benefits of the new RO4000 LoPro materials include the following. In addition, this article will cover some of the key features and benefits of this material.

Compared to standard PTFE, Rogers’ hydrocarbon ceramic laminates provide superior low-frequency performance and reduced fabrication cost. As a result, they are suitable for millimeter and microwave frequencies. In addition, we can process them using the standard glass/epoxy (FR-4) process without special vias. So, these advantages make Rogers RO4000 hydrocarbon ceramic laminates an excellent choice for high-frequency and low-frequency applications.

This unique material reduces stress on the PCB and prevents unwanted changes in the shape of the PCB. Its glass transition temperature is close to 280degC, making it ideal for projects that are temperature sensitive. The reverse-treated foil bonds to a standard RO4000 dielectric, resulting in low conductor loss. It is an excellent choice for use in the microwave and millimeter-wave frequencies.

Another notable benefit of Rogers RO4000 hydrocarbon ceramic laminates are minimizing insertion loss while maintaining the copper peel strength of standard RO4000 materials. As a result, this laminate offers unsurpassed thermal, mechanical, and electrical reliability while achieving better insertion loss. Additionally, it exhibits outstanding passive intermodulation characteristics. As a result, the RO4000 LoPro laminates provide better RF performance than standard PTFE.

The Rogers RO4000 LoPro hydrocarbon ceramic laminates are ideal for microwave and millimeter-wave frequencies. The patented reverse-treating foil bonding technique ensures a low conductor loss, improving signal integrity. Moreover, the RO4000 hydrocarbon ceramic laminates are ideal for high-frequency and low-frequency circuits.

Conclusion

The introduction of Rogers RO4000 LoPro laminates further demonstrates the company’s expertise in developing high-performance materials. These laminates have a low z-axis coefficient of thermal expansion, which improves circuit performance while boosting yield. In addition, the products are lead-free, which makes them ideal for a variety of analog and digital applications. This article will discuss the benefits of RO4000 LoPro.

The Rogers RO4000 LoPro has excellent electrical and mechanical properties. Its minimal dispersion rate promotes high-speed performance. The Rogers RO4000 LoPro is an ideal choice for high-frequency applications. The materials are suitable to be compatible with FR-4. The two materials are compatible and are often helpful in different applications. If you’re looking for a high-quality board for your next project, this material should be your first choice.

The Rogers RO4000 LoPro is a good choice for high-performance applications. The product uses reverse-treated copper foil, which has the same copper peel strength as standard RO4000 laminates. This results in high-quality, low-cost products with improved insertion loss and passive intermodulation. However, you should be careful when choosing a laminate. Ensure that the one you choose is suitable for the application.