Dear Customers,

Welcome To RayMing Technology , We just move new website, If any questions, or Any PCB inquiry, Pls send mail to sales@raypcb.com , We will get back to you ASAP.

     

    How Is the PCB Made

    Author: stan stan | Catgorys: PCB Manufacturing Technology

     

    For PCB board, I believe that you are no stranger to electronics workers. It is an important part of modern electronics. It is also indispensable. How much do you know about its production process? Let's take a look at it.     The substrate of the PCB itself is made of a material that is insulated and hard to bend. The thin circuit ma...
     
     

    Research on PCB Plug Mechanism and Effective Co...

    Author: stan stan | Catgorys: PCB Manufacturing Technology

     

    Some questions and how to control the PCB plug mechanism are what many people want to know, so this article brings you this knowledge.   First, the cause of the question   With the continuous improvement of the manufacturing precision of PCB manufacturers, the vias made by PCB printed circuit board manufacturers are getting smaller and...
     
     

    Classification and selection of PCB materials

    Author: mia | Catgorys: PCB Manufacturing Technology

     

    Classification and selection of PCB materials   1.The FR-4 we often choose is not the name of a material. We often refer to "FR-4" as a code name for a flame-resistant material. It means a material specification that the resin material must be self-extinguishing after being burned. It is not a material name, but a kind of material. Materi...
     
     

    Where PCB's Are Found, the Products, PCB Types,...

    Author: mia | Catgorys: PCB Manufacturing Technology

     

    There is no escape from the word printed circuit boards (PCB’s) when it comes to repairing electronic appliances – well, most of the time. So if you’re looking to have your own Printed Circuit Board designed, or want to know where PCBs are usually found, then here’s some information that’ll be useful to know.   Here’s a quick answer, then i...
     
     

    Why does the PCB's insulating green paint peel ...

    Author: mia | Catgorys: PCB Manufacturing Technology

     

    Why does the PCB's insulating green paint peel off when the PCB is in an automatic tin furnace?   After the PCB is over the automatic tin furnace, the insulating green paint on the under-board line will peel off. Don't know why? What is the reason for S/M Peeling after the gold?   There are three major possibilities for green paint pee...
     
     

    PCB Solder Mask Types, What Are They, the 4 Typ...

    Author: mia | Catgorys: PCB Manufacturing Technology

     

    Solder mask, also known as solder stop mask, is a thin layer of polymer used on a PCB board to prevent the solder points from forming a bridge. The solder mask also prevents oxidation and is applied to the copper traces on the PCB board.   Here’s a quick answer, then we’ll dive into some details as not all solder masks are equal!   Wh...
     
     

    The meaning of PCB copper and the design diffic...

    Author: mia | Catgorys: PCB Manufacturing Technology

     

    The meaning of PCB copper and the design difficulties   The so-called copper coating is to use the unused space on the PCB as the reference surface, and then fill it with solid copper. These copper areas are also called copper filling. The significance of copper clad is to reduce the ground line impedance, improve the anti-interference abil...
     
     

    The Difference and Role of PCB Paste Mask and S...

    Author: mia | Catgorys: PCB Manufacturing Technology

     

    The Difference and Role of PCB Paste Mask and Solder Mask   Introduction to solder mask   The solder mask is the soldermask, which refers to the part of the board that is to be greened. In fact, this solder mask uses the negative output, so after the shape of the solder mask is mapped to the board, it is not the green oil solder mask, ...