Skip to content

Features, Functions, and Benefits of 2.4 GHz Patch Antenna

This article discusses a miniaturized 2.4 GHz patch antenna for wireless connections. First of all, a conventional microstrip-fed patch antenna operates close to 10 GHz. This antenna is redesigned to operate at lower frequency. Also, a uniplanar-compact-photonic-band-gap replaces the ground plane.

What is 2.4 GHz Patch Antenna?

Patch antenna are usually integrated in indoor settings. You can connect the 2.4GHz patch antenna for wireless access points. Also, this patch antenna is suitable for linking two locations without the need for wires. The 2.4 GHz can share data or integrate a VoIP wireless link. You can link the 2.4GHz directional antenna to Netgear, Cisco, ZyXel, Linksys, D-Link or other WAP (Wireless Access Points). This helps in achieving more signal strength.

The wireless signal will transmit more if the access point’s transmit power is stronger. Therefore, this offers a better enjoyable Internet experience for people. The Transmit Power on Belkin, Linksys, and Dlink Wireless Access Points (WAP)  is usually within the range of  15dbm, or 32mW Transmit Power.

Therefore, this only indicates that when you link a high gain antenna, it will provide a helpful solution to your range. However,  it won’t offer a better distance and signal strength a 200mW Access Point will offer. With an outdoor patch antenna, you can easily get the best range. You will need to upgrade your D-Link Access point. Rp sma

2.4 GHz Patch Antenna is a commonly used antenna and has been widely used across a wide range of sectors because of the benefits it offers. This antenna is a low profile, lightweight, and low cost option. It has got good mechanical strength, high gain, wide frequency band.

Due to their low cost, simple design, and small size, these patch antennas are easy to use and install. 2.4 GHz Patch Antenna is ideal for use in wireless communications like mobile communication, radar, navigation systems, and satellite communication.

What are the Features of 2.4GHz 14dBi Outdoor Directional Antenna GNS-1403?

The 14dBi directional antenna offers a lot of features. These features make it an ideal option for connection two locations without the need for wires. Below are some of this antenna features:

  • It has a coverage area which offers extended point to point linking
  • This outdoor directional antenna comes with weatherproof enclosure which helps in outdoor deployment.
  • It has an N-Type Female connector. This works perfectly with most of access points / wireless routers.
  • Also, it offers easy installation mounting kit such as L-Bracket and U-Bolt.

What is the Function of this Antenna?

The Outdoor Directional Antenna GNS-1403 is an effective antenna that functions in the 2.4GHz band. Also, it offers 14dBi directional operation. Therefore, this extends to the wireless range and offers improved Wi-Fi performance.

Also, the 2.4GHz directional antenna comes with N-Female connector. The N-female connector is an important feature which helps in linking to any outdoor or indoor access point with the use of a coaxial cable.  Ground plane Furthermore, it is very compatible with the majority of wireless access point.

The Outdoor Directional Antenna GNS-1403 offers wireless connectivity at more distances. Therefore, it allows you to enjoy the advantages of wireless connectivity at much greater distances.  Another benefit of this Outdoor Directional Antenna GNS-1403 is that it requires no installation or configuration software.

Benefits of 2.4GHz 14dBi Outdoor Directional Antenna

Easy To Use

It is very easy and straightforward to install the 14dBi patch antenna. If you are using this antenna for the first time, you will find it so easy to install. Also, this antenna works well with most wireless device such as Routers, Network Adapters, Access Points and Bridges.

Range and Performance

Decibels (dBi) represent the measures the power rating of Wi-Fi antennas. The majority of standard rubber duck antennas measure more than 2 dBi. However, the GNS Wireless 14dBi patch antenna enhances power to 14dBi.

Also, Your wireless signal is concentrated to an outdoor directional antenna directly towards your network’s wireless source. Therefore, this leads to a huge increase in wireless distance. You can pair the outdoor directional antenna with another Hi-Gain 14dBi antenna to create a point-to-point solution. This solution will be much farther than the normal coverage.  

Plug and Play Installation

Installing the GNS Wireless outdoor antenna is a very simple process. This is because it works well with most wireless devices with removable antennas in the market. Also, the 14dBi antenna comes with a great feature which is N-Type connector. This helps in supporting various wireless devices.  It is crucial to know that a  low loss antenna cable will be of great need for outdoor installation. Also, you should purchase the antenna cable separately.

You need a shorter cable to achieve less signal degradation or cable loss because of the cable length. However, this depends on your set up. The 13dBI 2.4GHz with N-Female connector can be connected to any indoor access point that has removable antenna such as ZyXel , Linksys, Netgear, Cisco, D-Link, or other Wireless Access Point for improved signal strength.  

Furthermore, the 2.4GHz directional patch antenna is ideal for linking two locations without wires, data sharing, or integrating a VoIP wireless link. Also, you need coaxial cable types and connectors to operate this 2.4GHz patch antenna. However, it is crucial you ask your supplier some questions. You can search for Videos online to know more.

The wireless signal will carry more power if the transmit power of the access point has more strength. Therefore, this will offer a more enjoyable experience from your customers. You can link the 2.4GHz directional antenna to Netgear, Cisco, ZyXel, Linksys, D-Link or other WAP (Wireless Access Points). This helps in achieving more signal strength. Cart buy

The wireless signal will transmit more if the access point’s transmit power is stronger. Therefore, this offers a better enjoyable Internet experience for people. The Transmit Power on Belkin, Linksys, and Dlink Wireless Access Points (WAP)  is usually within the range of  15dbm, or 32mW Transmit Power.

Conclusion

Patch antenna are usually integrated in indoor settings. You can connect the 2.4GHz patch antenna for wireless access points. Also, this patch antenna is suitable for linking two locations without the need for wires.