Product was successfully added to your shopping cart.
0item(s)

You have no items in your shopping cart.

Arlon PCB  ( Any Arlon PCB Enquiry Pls send mail to  Sales@raypcb.com   ) 

Arlon PCB Materials for Electronics (MED) is a Division of Arlon LLC a major manufacturer of specialty high performance laminate and prepreg materials for use in a wide variety of PCB (printed circuit board) applications. These applications typically require laminates with specialized electrical, thermal, mechanical, or other performance characteristic that exceed those of traditional standard FR-4 materials. Arlon Electronic Substrates specializes in thermoset resin technology including polyimide, high Tg multifunctional epoxy, and low loss thermoset laminate and prepreg systems. These resin systems are available on a variety of substrates including woven glass and non-woven aramid. Typical applications for these materials include advanced commercial and military electronics such as avionics, semiconductor testing, heat sink bonding, High Density Interconnect (HDI) and microvia PCB’s (i.e. in mobile communication products). Arlon Microwave Materials specializes in fluoropolymers (i.e. PTFE), ceramic-filled fluoropolymers, and low loss ceramic hydrocarbon thermoset laminates that deliver the electrical performance needed in frequency-dependent circuit applications such as base station antennas, phased array radars, power amplifier boards, communications systems, and various other antenna applications. An exciting product is a lower loss version of CLTE, called CLTE-XT. CLTE-XT has the lowest loss, lowest thermal expansion, highest phase stability, and lowest moisture absorption of any product in its class.

 

Arlon PCB Material Part Number : 

Arlon Polyimide Products

Arlon 33N Kerimid 701 (VO) Polyimide
Arlon 35N Kerimid 701 (V1) Polyimide
Arlon 85N Polyimide - Unmodified
Arlon 84N Multifilm Hole-Fill Prepreg
Arlon 38N Low Flow Polyimide Prepreg
Arlon 37N Low-Flow vs. No-Flow Polyimide
Arlon HF-50 Polymide Hole Fill Compound

Arlon Epoxy Products

Arlon 44N "Multifilm" Hole-Fill Prepreg
Arlon 45N Multifunctional Epoxy
Arlon 47N Low-Flow Tetrafunctional Epoxy
Arlon 49N Low-Flow Multifunctional Prepreg

Arlon Legacy Thermount® Products

Arlon 51N Low-Flow Lead-Free
Arlon 55NT Multifunctional Epoxy/Thermount®
Arlon 85NT Polyimide/Thermount®
Arlon 55LM Low Moisture Regain Thermount®
Arlon 55ST Multifunctional Epoxy/Thermount®

Arlon Microwave Products

Arlon CLTE Product Family

Arlon CLTE-XT
Arlon CLTE-AT
Arlon CLTE

Arlon TC Product Family

Arlon TC350
Arlon TC600

Arlon Next Generation of Lower Loss Materials, Available with PIM+ Technology
Arlon AD255A
Arlon AD260A
Arlon AD300A
Arlon AD320A

PTFE and Microdispersed Ceramic reinforced with Commercial Grade Glass
Arlon AD350A
Arlon AD410
Arlon AD430
Arlon AD450
Arlon AD1000

Arlon Traditional Products - High PTFE to Glass Ratio, Lowest Loss Woven Fiberglass Reinforced PTFE - Unidirectional Plies
Arlon CuClad 250GT
Arlon CuClad 250GX
Arlon CuClad 233LX
Arlon CuClad 217LX

Arlon Traditional Products - High PTFE to Glass Ratio, Lowest Loss Non-Woven Reinforced PTFE
Arlon IsoClad 917
Arlon IsoClad 933


Arlon Ultra Thin Laminates with Higher Dielectric Constant
Arlon AD5
Arlon AD10

Arlon Ceramic Hydrocarbon Thermoset Laminates and Pre-Pregs
Arlon 25N
Arlon 25FR

Arlon Legacy, Low Cost Commercial Based Laminates
Arlon CLTE-LC
Arlon AD250
Arlon AD255
Arlon AD270
Arlon AD320
Arlon AD350
Arlon AD600
Arlon AR1000


Thermoplastic Bonding Films for Stripline and Multilayer Packages
CuClad 6250
CuClad 6700
CLTE-P

 

 

 

 

 

 

 

 

 

 

 

Arlon PCB

There are no products matching the selection.

Communicate with Supplier

RayPCB Sale Manager
Join RayPCB Community

Communicate with Supplier

RayPCB Sale Manager
Join RayPCB Community